CLICK ON PICS FOR MORE INFO AND PRICING ALL THESE STEREO RACKS ARE AVAILABLE FINISHED AND UNFINISHED AND IF YOU WANT SOMETHING DIFFERENT JUST ASK
Click Here TO SEE MY Customers pictures they sent Me
6 SHELF RACK -5 shelves 2" thick and 1 top shelf 3" thick CLICK ON PICS FOR INFO AND PRICING
MAPLE STEREO RACK 4 SHELF RACK 1" THICK SHELVES
CLICK ON PICS FOR INFO AND PRICING
MAPLE STEREO RACK WITH SATIN CHERRY FINISH 4 SHELF RACK -4 shelves 2" thick CLICK ON PICS FOR INFO AND PRICING
MAPLE STEREO RACK WITH A BLACK LACQUER FINISH 5 SHELF RACK WITH 2" THICK SHELVES CLICK ON PIC FOR INFO AND PRICING
Maple Rack with Cherry Satin Finish MAPLE 4 shelf Rack with 3" thick shelves CLICK ON PIC FOR INFO AND PRICING
MAPLE STEREO RACK 2 SHELVES 4" THICK AND 2 SHELVES 3" THICK CLICK ON PICS FOR INFO AND PRICING
MAPLE AMP STAND 3"THICK WITH 3" THICK LEGS CLICK ON PICS FOR INFO AND PRICING
THIS IS THE SAME STAND AS THE ONE PICTURED ABOVE. Each one of these Stands are made individually so You can place them one on top of the other or alone
The legs are Mortised and Tenoned into the top. They will never come loose. It is made of Hard Maple and It's dimensions are 12"h x18"w x24"l. The top and legs are 3"thick. This Stand is unfinished. Or I can finish it any way you want. I can build this to any size you would like.
CLICK ON PICS FOR INFO AND PRICING
Cable Isolators
I made these blocks and boxes for a "STEREO NUT" in California.
He will put a inch of sand into the bottom of it and then he is going to place the block back inside the box and set his Amp on the block. The box has Dovetailed corners.
The wood I used to make it is Maple. This is unfinished,I can finish it also.
If you need anything like it send me an email
I made this Stand for a "AUDIOPHOOL" in New York.
It is a Double Stand side by side with a 3" top spanning both Racks. It is made of Maple with a Satin Polyurethane Finish. The Middle Shelves are made to slide out so he can change his gear around, which gives him more flexibility. Total lenght is 48" and 18" deep. It is a neat and clean looking rack.
If you need anything like it send me an email
I made this Amp Stand for a pair of Rowland 201s for a "AUDIOPHOOL" in New York.
The Amp Stand is made with Pennsylvania Curly Maple. The stand legs are Mortised and Tenoned into the top and Bottom. All wood joinery without any screws or metal fasteners. The top and bottom are is Flat grained Curly Maple
If you need anything like it send me an email
I made this box for a STEREO NUT in Tennensee.
He had a Marantz CD Player built into it.
The lid is removeable.
The wood I used to make it is Curly Maple.
If you need anything like it send me a email
I made this Stand for my Daughter.
The wood I used to make it is Pennsylvania Cherry. It can be custom made to any size you would like. The shelves can be thicker This piece is all Solid Cherry with a Cherry Stain. It can also be made in Maple or any other wood you desire.
If you need anything like it send me an email
I made these 12"x14"x8" Hard Maple Amp Stands. The legs are mortised and Tennoned into the top.
It is a smaller verision of the big one I make.The wood I used to make it is Pennsylvania Maple. It can be custom made to any size you would like. The shelf can be thicker This piece is all Maple with a Satin Polyurethane finish. It can also be made in Cherry, Walnut or any other wood you may desire or any other wood you desire.
If you need anything like it send me an email
I made this as a Speaker Stand. It is 4" Square.
The wood I used to make it is Pennsylvania Maple. It can be custom made to any size you would like. Finished with flat black and 4 coats of Laquer Or leave it Natural. It can also be made in Cherry, Walnut or any other wood you desire.
If you need anything like it send me an email
Untitled
TIMBERNATION
For Special Orders or to pay by Check or Money Order click here
